Phone parts

The Huawei P30 Pro rear-facing camera module is a replaceable part. When our Huawei P30 phone is crashed, water damaged, and the cameras are broken, we need to replace the rear camera module. This is the repair process presentation of how to replace the Huawei P30 Pro rear-facing cameras we would like to show you below. Hope this would be useful to you if you are interested in smartphone repair.

The Samsung S20 internal structure mainly contains a display screen, middle frame and some small parts. To tear down the Samsung S20, we need to be careful and patient. The first step we would do is take off the battery door, and then off the wireless charging coil. After that we may take off the inside parts which are install on the middle frame. We can disassemble the display screen with middle frame at last and finish the process. Let’s see the details presented below:

The iPhone 12 has been launched on the global market this October. This new iPhone model has become the hottest sale smartphone model this year. Since we can see the differences of this new model on the appearance, we are still curious about the inside parts and structure of iPhone 12. This is the teardown steps we would like to present here. Besides, we will share with you tips about iPhone 12 teardown and repair on the following, hope you would be interested if you know iPhone repair.
 

The iPhone 12 is launching on the phone market this October. Although it is a time we still have to wait to see this new iPhone module in the flagship store, some of the third-party iPhone 12 back housing has been manufactured. Based on this, we are trying to modify a new iPhone 12 phone by replacing the iPhone 11 parts in the back housing. Let’s check the specific steps below.

The iPhone incoming calls not show when on sleep mode. This issue exists because of the faulty signal baseband component on the logic board. The normal repair solution is taking out the logic board, checking the baseband, and replacing the faulty component. The process would be difficult and complex. Here we can connect a wire from the baseband wake signal point to the WiFi wake signal point to borrow the signal so that the problem would be solved. Check the detailed steps below.   

The Samsung Galaxy S20 charging port is combined in a module of PCB board. It can be swappable if the charging port is broken. To replace the charging port PCB board, we have to tear down the back housing, take off the wireless charging port, and the loudspeaker bracket as well. Here are the specific steps Etrade Supply would like to show you blow.

Sometimes our iPhone 11 face ID keeps failing for recognition, which keeps reminding us to move the iPhone higher all the time. Although we have reset every setting on our iPhone, this issue still exists and we don’t why. This might be the problem of the dot projector flex of the Face ID module. Here we show you a repair case about how to fix the iPhone 11 face ID issue by replacing the damaged dot projector flex. 
​

The iPad Air 3 earphone is a swappable part on the up left side. To replace the earphone, we need to tear down the display screen. Also, the iPad headphone has a long flex cable ribbon which is adhesive on the panel. Here we would like to show you steps on how to replace the iPad Air 3 headphone.

The true tone is a special function on iPhone original display screen. When we replace the iPhone display screen with a third party manufactured LCD display screen, the true tone function will be gone. Here we would like to show you a solution on how to recover true tone function on an LCD display screen by transmitting data from the original display with a JC V1 programmer.

When we swap our iPhone battery with the third-party battery, there will be a message of non-genuine battery warning pop-up on the screen when we turn on the phone. This makes the awkwardness and frustration to our customers, although the newly replaced battery is good. Here Etrade Supply would like to show you tricks on how to make the warning message disappear for a month, without tearing down the iPhone and the battery.